Q: What is the meaning of the different colors of the controller light?
A: Here is a summary of the status of the controller light:
- The green light flashes: waiting for the computing unit to connect;
- Steady green light: connected, not in charging status, with power more than 33%;
- Green and red lights flash alternately: connected, not in charging status, with current power less than 33%;
- Blue light flashing: connected, undercharging at the time, the battery is not full;
- Steady blue light: connected, undercharging and the current battery is full already.
Q: How can I power on the controller?
A: First, please make sure that the controller has already been turned on (the switch is located at the backside), and also check whether the indicator light is on.
If the indicator does not light up, please put the controller on the computing unit, charge it for 10 minutes, and then try again.
Q: How to find/reset the laser?
A: Long press the place where the light is on on the controller, and the laser can be reset.
Q: What should I do if the controller indicator light keeps flashing in green and cannot connect to the computing unit?
A: Please try to follow the steps below:
- Before powering on, please keep the glasses, computing unit, and controller separate;
- Turn on the computing unit and the controller. At this time, the light on the controller will flash green. Please wait for the indicator light on the computing unit to change from flashing to steady;
- Plug in the glasses, then you will see an opening animation. After it, the handle light should stay in green or flash in red and green. At this time, the laser of the handle can be seen in the space and can follow the controller’s movement.
- If the light on the controller is still flashing in green, please plug out the glasses, place the controller on the computing unit, and re-plug in the glasses again. After waiting for 5 seconds, the indicator light of the controller should change to flashing blue or steady in green, which means that the controller has been successfully connected to the computing unit.
Q: What is the meaning of different colors of light on the computing unit?
A:
- When not charging:
- Powering on: green light increasing regularly;
- Powered on: light in pink; power less than or equal to 33%;
- Power between 33%-66%: two green lights
- Power more than 66%: three green lights
- Standby: light in blue
- Shutting down: green light decreasing regularly
- When charging:
- Power less than or equal to 33%: single green light flashing.
- Power between 33%-66%: the second light flashes green
- Power between 66%-99%: the third light flashes in green
- Sleep after fully charged: three blue lights
Q: How to check the software version of the computing unit?
A: After connecting to the Windows computer (you might need a type-C adapter), please use scrcpy and the computer will show an Android interface. Check the version information using the following process: settings-System-About phone-Build Number Information, you can see the version of the software.
Q: How to upgrade the computing unit?
A: When the computing unit is connected to the glasses and a WiFi, it will automatically process an OTA upgrade (if there is a newer version). At that time, the user can see a progress bar through the glasses.
Q: How to get a wifi connection on the computing unit?
A: After connecting to the Windows computer (you might need a type-C adapter), please use scrcpy and the computer will show an Android interface. Just set Wifi in setting-Network&Internet-WiFi.
Q: What is the function of the Micro-USB?
A: It cannot be used for the connection with the mobile phone. But the other functions are the same as a Type-C interface; We recommended using the Type-C interface to connect the computing unit with the computer.
Q: How long could the battery support?
A: The duration of use may vary depending on specific user scenarios (the power of the computing unit is 7000 mAh).
Q: Why can’t OTA be upgraded? How to upgrade OTA?
A: Please refer to: Nreal Headset How to Upgrade OTA