VR Real Feel Racing 3d Racing Simulator Troubleshooting and Guide

QUICK START GUIDE

Follow these instructions and you’ll be playing in just few minutes

1. Download The Free App

Download The Free App

Search on the Apple Store or Google play for VR Real Feel™ Racing

Download The Free App

System requirement: Android 4.4 or above iOS 9.3* or above

The minimum OS requirement may change from time to time – always check www.vr-entertain.com for the latest OS requirement.

2. Install Batteries

Install Batteries
  • Unscrew the battery door on the back of the steering wheel.
  • Install 3 x AAA batteries (not included) Replace the battery door

3. Setting Up Smart Phone

Turn OFF your WIFI and Cellular data. This will keep you from being disturbed while playing. You can also put your phone in “airplane mode” but be sure your Bluetooth® connectivity is still enabled.

IMPORTANT: Bluetooth® 4.0(BLE) connectivity must be working for you to play with VR Real Feel™ Racing.

4. Launch the VR REAL FEEL™ app

  • Click & launch the VR Real Feel™ APP on your device.
  • Turn the ON/OFF switch on the back of the steering wheel to ON.
Launch the VR REAL FEEL
Launch the VR REAL FEEL
Launch the VR REAL FEEL

LED on the steering wheel should be lit This tells you that the Bluetooth® connection was successful

NOTE:

You must have the steering wheel connected by Bluetooth® technology for the App to open.

5. Insert Your Phone

Insert Your Phone
  • To open the front of the headset, press both A and B buttons down at the same time and flip the headset open.
  • Spread the self-adjusting frame open wide enough to insert your phone. Release and make sure that it holds your phone securely.

6. Center your phone

Center your phone
  • Align the white line on the APP screen with the marker on the frame to center your phone properly for optimum viewing. Close the VR headset carefully; make sure the button on top is locked.
  • For some phone models the frame “clips” may align with control buttons such as power or volume. Attach the included foam pad to the frame clips to minimize pressure on those buttons.
Center your phone

7. Put On the Headset

Place the headset on your head. Make sure the center strap is centered over the top of your head. Adjust the straps so the headset fits snugly and comfortably.

8. Let’s Race!

  • Hold the steering wheel and follow the instructions in the app to start the race. The drawing on the right explains the controls.
  • Press ( + ) button to continue.
  • Go to settings menu to adjust your settings.
  • When you are finished, select the race you want to play and press ( + ) button.

TIPS AND TROUBLESHOOTING

  1. Don’t drive too fast at first or you will crash a lot. Get used to the feel of your car and the track first and build up your driving skills. Start slowly and build your way up.
  2. Look for special icons on the track. They may hold some fun surprises.
  3. Hold down the ( + ) button to go faster and the ( – ) button to go slower
  4. If you see yourself “fishtailing”, try to hit to the ( – ) button to gain control of your car.
  5. Because the game is generating stereo high-definition graphics, your phone’s battery life may be shorter than with other games. Make sure your phone is well charged before playing.
  6. While playing VR Real Feel™ Racing, you may notice that the phone is warm to the touch. This is normal. If it gets too warm stop the app and let the device cool down.
  7. If the LED on the Steering Wheel does not flash 2 times when you turn on the switch to ON, Replace the batteries and try again.
  8. If the LED does not come on after you press SCAN on the app, check to make sure your Bluetooth® connectivity setting is in the ON position. You must be running Bluetooth® 4.0(BLE) connectivity for the App to open. Restarting the app and steering wheel may also help.
  9. If you want to play silently, plug in your ear buds (not included) through the slot on the side of the headset to your phone.
  10. Bluetooth® headphones are not available for this app because mobile devices cannot connect Bluetooth® earphone and steering wheel at the same time.

Battery Warnings:

Important! Only adults should replace batteries.

  • Rechargeable batteries not recommended.
  • Alkaline batteries are recommended.
  • Rechargeable batteries must only be charged under adult supervision.
  • Rechargeable batteries must be removed from the toy before recharging.
  • Non-rechargeable batteries are not to be recharged.
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
  • Only batteries of the same or equivalent type as recommended are to be used.
  • Batteries are to be inserted with the correct polarity.
  • Exhausted batteries are to be removed from the toy.
  • The supply terminals are not to be short-circuited.
  • Please keep this information for future reference.
  • Remove batteries from the product before extended storage.
  • Do not dispose of this product in fire. Batteries inside may explode or leak.

Warning! Not suitable for children under 36 months. Small parts – Choking hazard. – Choking hazard.

CONTENTS AND SPECIFICATIONS MAY VARY FROM THOSE ILLUSTRATED. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

VR Entertainment

Android, Google Play and the Google Play logo are trademarks of Google Inc.

Apple, Apple logo, iPod touch and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Hereby, VR Entertainment Ltd. declares that this radio equipment is manufactured in compliance with the essential requirements and other relevant provisions of directive 2014/53/EC. A copy of Declaration of Conformity can be obtained from www.certaccess.com/VR49400.pdf

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by VR-ENTERTAINMENT LTD. is under license. Other trademarks and trade names are those of their respective owners.

Radio Frequency: 2.402-2.480 GHz
Power Output: 0.210mW

Place the 3 self adhesive foam pads on the inside are of the frame clips of the adjustable smartphone holder. This will help prevent the frame clips from accidentally pressing your smartphone buttons.

Place the 3 self

Read More About This Guide & Download PDF

Question About this Manual, Post in the Comment.