VR Real Feel Motocross Setup Guide

Below are the steps to set up the VR Real Feel Motocross system with a smartphone.

Step 1 – Download the APP

Download the VR Real Feel Motorcycle application.

Search on the Apple App Store or Google Play for VR Real FeelTM Motorcycle. System requirement: Android 4.4 or above iOS 9.3* or above.

Google Play Store APP Download

Apple APP Store Download

* The minimum OS requirement may change from time to time – always check www.vr-entertain.com for the latest OS requirements.

Step 2 – Install Batteries

1. Unscrew the battery door on the handlebar.

2. Install 3 x AAA batteries (not included) and replace the battery door.

Note: ALKALINE BATTERIES RECOMMENDED.

Step 3 – Setting up your Smartphone

Turn OFF your WiFi and Cellular data.

This will keep you from being disturbed while playing.

You can also set your phone to “airplane mode”
but be sure your Bluetooth® connectivity is still enabled.

IMPORTANT: Bluetooth® 4.0(BLE) connectivity
must be working for you to play with VR Real FeelTM Motorcycle.

Step 4 – Launch the VR Real Feel APP

1. Click & launch the VR Real FeelTM app on your device.
2. Turn the ON/OFF switch on the back of the handlebar to ON.

Press SCAN in the app to connect your handlebar to Bluetooth® technology. The game will start automatically when the handlebar is successfully connected.

LED on the handlebar should be lit. This tells you that the Bluetooth® connection was successful.

Note: You must have the handlebar connected by Bluetooth® technology for the app to open.

Step 5 – Insert Your Phone

To open the front of the headset, B press both the A and B buttons down at the same time and flip the headset open.

Spread the self-adjusting frame open wide enough to insert your phone. Release and make sure that it holds your phone securely.

Step 6 – Center Your Phone

Align the white line on the app screen with the marker on the frame to center your phone properly for optimum viewing. Close the VR headset carefully; make sure the buttons on top are locked. A VR HEADSET CENTERLINE

For some phone models, the frame “clips” may align with control buttons such as power or volume. Attach the included foam pad to the frame clips to minimize pressure on those buttons.

Step 7 – Put on the Headset

Place the headset on your head. Make sure the center strap is centered over the top of your head. Adjust the straps so the headset fits snugly and comfortably.

Note: If the headset is putting too much weight on your nose, make the center strap shorter.

Step 8 – Let’s Ride!

Hold the handlebar and follow the instructions in the app to start the game. Select the race you want to play and press the Confirm button.

Tips and Troubleshooting

• Make sure that furniture, objects, and people are out of the play area so you don’t accidentally bump into them while playing.
• Because the game is generating stereo high-definition graphics, your phone’s battery life may be shorter than with other games. Make sure your phone is well-charged before playing.
• While playing VR Real FeelTM Motorcycle, you may notice that the phone is warm to the touch. This is normal. If it gets too warm stop the app and let the device cool down.
• If the LED on the handlebar does not flash when you turn the ON/OFF switch to ON, replace the batteries and try again.
• If the LED does not come on after you press SCAN on the app, check to make sure your Bluetooth® connectivity setting is in the ON position. You must be running Bluetooth® 4.0(BLE) connectivity for the app to open. Restarting the app and the handlebar may also help.
• If you want to play silently, plug in your earbuds (not included) through the slot on the side of the headset to your phone.
• Bluetooth® headphones are not available for this app because mobile devices cannot connect to both your Bluetooth® earphone and the handlebar at the same time.
• If the VR image in the app is out of focus, follow steps 5 to 7 of this guide to make sure the phone is installed properly.

VR Real Feel Motocross Setup Guide