Vuzix M4000 Quick Start Guide

Your M4000 Smart Glasses System is an ergonomically designed, wearable Android-based computer with Wi-Fi connectivity, voice-command functionality, and HD camera — right out of the box, including:
• M4000 see-through viewer with an adjustable waveguide display screen
• 1000 mAh USB-C power bank
• USB-A to USB-C power cable
• USB-C to USB-C viewer cable
• M-Series Safety Glasses viewer frames with rail mounts
• Hard case for storage
• Spare Waveguide
• Tinted window
• Safety & Quick Start Guide

TROUBLESHOOTING COMMON ISSUES

SYMPTOM	DIAGNOSIS	REMEDY
M4000 will not turn on and status LED is not lit.	The battery is discharged.	Connect the battery to the wall charger for up to two hours for a full charge, then connect the battery to the viewer.
M4000 will not turn on and the status LED is blinking red.	The internal battery is discharged.	Leave the viewer connected to USB power. System will begin booting within a few minutes.
The M4000 display is not on but status LED is lit.	The screen has been turned off to conserve power.	Tap any button to wake the screen.
M4000 powers off after 20-30 minutes while plugged into USB.	USB source does not provide enough current	M4000 can draw up to 1.5A while in operation.

CHARGING FOR FIRST-TIME USE

Blue Arrow: Assembling the M4000 mounting system
Green Arrow: Power to M4000 from Battery

Charge the battery before use with a standard USB wall charger, and wait until all three LEDs are solid. Can take up to two hours if the battery is fully empty.

ASSEMBLING YOUR M4000 SMART GLASSES SYSTEM

1. Before attaching the viewer to either side of the smart glasses frame, determine your dominant eye for optimum use of M4000 capabilities
2. Attach the viewer to your preferred side of the safety glasses by sliding the mounting rail onto the temple mount on the frames. Once properly fitted, the unit will be adjustable by sliding forward and backward, and rotating/tilting the display.
3. Using the same mounting process, attach the on-frame battery to the other side of the frames.
4. Plug the USB-C viewer cable into the viewer and the on-frame battery (the viewer will automatically turn on).
5. When ready to wear your M4000 Smart Glasses, lift the power cable over your head to rest on your shoulders as you place the Smart Glasses as you would a pair of glasses.
6. Ear hooks and alternate nose pads are available for proper fit.

ADJUSTING & CLEANING THE M4000

Holding only the plastic housing of the lens, adjust left, right, up and down for optimal use. NEVER adjust by touching/moving the waveguide display—doing so may damage or destroy the waveguide display. When cleaning, you may stabilize the display by gently holding the outer edge, but only if the rest of the unit is properly supported.

NAVIGATING THE M4000

TOUCHPAD BUTTON NAVIGATION

Short press for primary functions:
front: forward navigation
center: back navigation
back: Select
Long press (approx one sec) touch
for secondary functions:
front: right-click
center: exit to the home menu
back: back one step
TOUCHPAD NAVIGATION
The 2-axis pad responds to up-and-down or back-to-front finger swipes.
Tap to select.

WEARING THE M4000

WI-FI QUICK CONNECT
The easiest way to connect to Wi-Fi is by scanning a QR code.

QR code setup:

1. Create a QR code securely* using
   www.vuzix.com/wifiQR directly from
   your phone or computer.
2. Open Scanner from the main carousel.
3. Center available QR code in the viewfinder
   to scan.
   *Vuzix cares about your privacy and security. By
   visiting this link, our website sends your browser the
   software to create the QR code. Your confidential data
   is processed locally on your own device and never
   sent to our server.
   

REGISTERING YOUR DEVICE

One finger:

1. Register your device by logging on
   to your Vuzix App Store account or
   registering from a computer or phone at
   www.vuzix.com/appstore/user/add-device.
2. Follow the instructions on the website
3. Once registered, you will see the serial
   number of your M4000 under your account.
4. The companion app for Android on Google
   Play and for iOS on the App Store enables
   easy setup and communication between
   your smartphone and M4000.

GETTING THE LATEST UPDATES

The M4000 will automatically check for updates once it is connected to Wi-Fi. Click Update Now on the following pop-up

Note: If your corporate firewall prevents access to the external website, your system administrator may provide additional settings for your M4000 or may provide a software update offline.

DEVELOPING FOR M4000

Developer documentation is available at vuzix.com/developers. In order to power the unit during development, please note:
• The included battery does not support data pass-through.
• The viewer should be plugged into the developer’s machine with a USB C-to-C cable for the best experience.
• If a USB A-to-C cable must be used, then using a CDP-capable port will provide enough power. If the USB-A port is not providing sufficient power, the functions of the device may become impaired without notice, and the viewer may shut down completely.

CLEANING AND CARE

• Clean the viewer and battery with a damp cloth and mild detergent if necessary. Do not use all-purpose cleaners as these may damage the seals and impair the water resistance.
• Make sure that there is no standing water in the USB connector before inserting the cable.
• Do not insert sharp objects into any holes in the viewer as this may damage the mesh and impair the water resistance.
• Do not use metal objects to clean the USB port as this may cause electrical damage.
• The waveguide may be cleaned using a microfiber cloth and lens cleaner or warm water and a mild detergent. Do not hold or handle the M4000 by the screen. Avoid exerting pressure on the screen as that can cause it to crack.

Vuzix M4000 Quick Start Guide Download